|
draft-bidulock-sigtran-m2pa-ig |
01.txt 01.ps 01.pdf 00.txt 00.pdf
|
SS7 MTP2-User Peer-to-Peer Adaptation Layer Implementer's Guide
This Internet-Draft provides information for the Internet community
on clarifications and interpretations of the text of the SS7 MTP-User
Peer-to-Peer Adaptation Layer (M2PA) based on working group comments
and experience at interoperability events. It also provides
information on specification addendum and errata -- whether or an
editorial or technical nature -- discovered to the date of this
document.
|
|
rfc4165 |
.txt
|
Signaling System 7 (SS7) Message Transfer Part 2 (MTP2) - User Peer-to-Peer Adaptation Layer (M2PA)
This document defines a protocol supporting the transport of
Signaling System Number 7 (SS7) Message Transfer Part (MTP) Level 3
signaling messages over Internet Protocol (IP) using the services of
the Stream Control Transmission Protocol (SCTP). This protocol
would be used between SS7 Signaling Points using the MTP Level 3
protocol. The SS7 Signaling Points may also use standard SS7 links
using the SS7 MTP Level 2 to provide transport of MTP Level 3
signaling messages. The protocol operates in a manner similar to
MTP Level 2 so as to provide peer-to-peer communication between SS7
endpoints.
|
|
draft-ietf-sigtran-m2pa |
14.txt 13.txt 12.txt 11.txt 10.txt 09.txt 08.txt 07.txt 07.ps 07.pdf 06.txt 05.txt 04.txt 03.txt 02.txt 01.txt 00.txt
|
SS7 MTP2-User Peer-to-Peer Adaptation Layer (M2PA)
This Internet Draft defines a protocol for backhauling of SS7 MTP2
User signalling messages over IP using the Stream Control Transmission
Protocol (SCTP). This protocol would be used between a Signalling
Gateway (SG) and Media Gateway Controller (MGC). It is assumed that
the SG receives SS7 signalling over a standard SS7 interface using the
SS7 Message Transfer Part (MTP) to provide transport. The Signalling
Gateway would act as a Signalling Link Terminal.
|
|
draft-george-sigtran-m2peer |
03.txt 02.txt 01.txt 00.txt
|
SS7 MTP2-User Peer-to-Peer Adaptation Layer
This Internet Draft defines a protocol for adapting the SS7 MTP2 User
for signaling over an IP connection using the Simple Control
Transmission Protocol (SCTP). This protocol is used between SS7
Signaling Points equipped with an IP connection (IPSPs). Signaling
points using this protocol are capable of MTP Level 3 routing. This
protocol may be used in a Signaling Gateway (SG). The SG receives SS7
signaling over a standard SS7 interface using the SS7 Message Transfer
Part (MTP) to provide transport, and has the capability to use MTP to
route signaling to IPSPs. The protocol thereby retains the features
of MTP Level 3, including Network Management.
|
|
draft-bidulock-sigtran-m2pa-test |
08.txt 08.ps 08.pdf 07.txt 07.pdf 06.txt 06.ps 06.pdf 05.txt 05.ps 05.pdf 04.txt 04.ps 04.pdf 03.txt 03.ps 03.pdf 02.txt 02.ps 02.pdf 01.txt 01.ps 01.pdf 00.txt 00.ps 00.pdf
|
SS7 MTP2-User Peer-to-Peer Adaptation Layer Test Specifications (M2PA-TEST)
This Internet Draft provides information for the Internet community on
test cases for testing the SS7 M2P2-User Peer-to-Peer Adaptation Layer
[M2PA11] based on the conformance test specifications for SS7 MTP
Level 2 [Q.781].
This memo describes the test environment and a detailed description of
test cases for validation, compatibility and interoperability testing
of the M2PA protocol implemented on the foundation of ITU SS7 MTP
Signalling Links [Q.703].
|
|
draft-george-sigtran-m2pa-interop |
01.txt 00.txt
|
M2PA Interoperability Test Results and Issues
This document captures problems and issues discovered on the SIGTRAN
mailing list and at M2PA Interoperability Tests. This document will be
updated after each interoperability test to include any new issues.
Two basic sets of problems are identified by this draft: (1) issues
that need to be addressed in the next revision of the M2PA draft, and
(2) issues that were found that are strictly implementation problems.
|
|